No. of Employees Total Office Shop Engineers
Fabrication Shop 49 7 40 2
Field Construction 85 3 81 1
Business Structure
Majority-Women Owned
Union Affiliation
N/A
Engineering Capacity
Can work from conceptual drawings? Yes
Can take mechanical design responsiblilty? Yes
Can supply detail drawings? Yes
Shop Size - Total Area:30,000 sq.ft. | Land Area - 6 Acres
Location No. O.H. Cranes Crane Capacity Hook Height
Bay 1 50' x 150' 2 OH & 4 jibs (3) 5 ton 16ft.
Bay 2 30' x 150' jibs only 2 ton 16ft.
Bay 3 50' x 140' 2 OH & 2 jibs (2) 10 ton 26 ft.
Bay 4 30' x 140' 1 OH & 2 jibs 5 ton 26ft.
Bay 5 40' x 60' jibs only 1 ton 12ft.
Bay 6 (exterior) 50' x 100' 1 gantry 5 ton 14 ft.
Bay 7 40' x 80' 2 overhead 5 ton 16 ft.
Material Handling Equipment:
(4) Column Overhead Hydraulic System
Rated to 150T and is available for use in bays 1-4 and outside of the shop.
Cranes
40T Grove Rough Terrain Crane
15T Grove Rough Terrain Crane
12T Drott Carry-Deck Cranes
Fork Lifts
6000# Case All-Terrain
8000# Toyota – Shop Use
10,000# JLG Telescoping w/ 44’ Boom
Welding Manipulators, Positioners and Tank Turning Rolls
Positioners – up to 30T capacity – (10) Available
Tank Turning Rolls – up to 120T capacity – (too many to list)
Up to 15’6” max diameter on Turning Rolls – (4) Available
Other
Yard Truck with 30’ Trailer for Material Moving
Coming December 2007 – 45’ JLG Articulated Lift
**Maximum Production Size – 18’6” Diameter and not exceeding 150T
Major Fabrication Equipment and Maximum Capacities:
Shearing:
12’ Wide X 5/8” Thick Material
Rolling:
Plate – 1.25” Thick X 10’ Wide Material – (4) Diff. Sizes Available
Angle – 4” x 4” X ½” Angle and Bar (Pipe to 3” SCH 40)
Forming:
Press Brake – 14’6” Wide Bed X 300T
C-Frame – 100T
Standard Press – 50T
Cutting:
(1) Plasma – CNC and Manual to 2.5” thick
(2) Oxy-fuel – CNC and Manual to 10” Thick. 10’6” X 41’6” Table. Model Year 2008 – Messer “Global Control” with “Global Rotator” capable of complete double profile beveling.
Machining:
Vertical Boring Mill – 60” swing X 54” max height
Lathe – 24” Swing
Horizontal Mill - #3
Drill – 5’ Radial Arm
Plate Beveller – up to 1-½” Thick Material
**Virtually unlimited capacities for all listed above through sub-contractors**
Materials of Construction:
Carbon Steel, Stainless Steel (All types), Nickel Alloys, Titanium, Aluminum, and Others Available on a per Project Basis.
Fabrication Capabilities:
Pressure Vessels, Heat Exchangers, Columns, Tanks, Bins, Sheet Metal, Structural Steel, Piping, Plate Fabrication, Dryers, Ductwork, Spouts, and virtually any Custom Design that a Customer could imagine.
**All of the above can be done with the following Weld Processes:
SMAW, GTAW, GMAW, SAW, FCAW
NDE Capabilities:
In house:
Hydro Testing – Maximum Pressure of 3000psi,
Pneumatic Testing – Maximum Pressure of 150psi,
Dye Penetrant Testing.
Operator Qualifications:
ASNT, NT-TC-1A
Sublet:
Radiography, Magnetic Particle, Ultrasonic, any other specific job req.
**Authorized Inspection Company: Hartford Steam Boiler Inspection and Ins. Co.